Pedals

Wolf Tooth Waveform Aluminum Pedals are designed for all-mountain riding, from XC to downhill. They are engineered to lock in your foot with a shape that matches your shoe, rear-loading pins for grip, and a dual-concave profile to further cradle your feet. The pedals come in two sizes, and are proportionally scaled to provide a supportive platform shaped to match the footprint of your shoe. Large is 112mm x 106mm, small is 105mm x 99mm. Dual-Concave Profile: - Waveform pedals are 14mm thick on the perimeter and just 12.5mm thick in the center. This profile cradles your foot, front to back and side to side. Extra Grip: - Each side of the pedal has 11 stainless steel rear-loading pins for loads of traction. An additional six pins ship with each set of pedals and they are available as replacement parts. Shaped with Purpose: - The shape of Waveform Aluminum Pedals matches the footprint of your shoe Reliable Performance: - Three low-friction, fully sealed cartridge bearings and one igus bushing with a custom radial seal protect internal components against trail debris for riding in all conditions. Tapered Edges: - Large, tapered leading edge to deflect pedal strikes on rocky, rooty terrain Two sizes: - Large: 112mm x 106mm - 384g - Small: 105mm x 99mm - 373g Each size is proportionally scaled to match the silhouette of your shoe based on foot size or pedal size preference.

Built on the cutting-edge Speedplay Pedal System, Power Zero single-sided power pedals deliver reliably accurate power and cadence data in a race-proven pedal system. This powerful combination creates an unrivaled power pedal that helps cyclists optimize performance by providing the visibility, adjustability and efficiencies needed to break through to the next level. Pair with the Wahoo ecosystem of smart devices for a more full picture of your data and performance, and to track, analyze, share and improve. - Single-sided power metrics measure cadence from the left pedal; power is tracked and doubled to estimate total power output no matter where you are crushing watts, with lab tested +/- 1% power accuracy - Simple and intuitive Wahoo Fitness app offers guided instructions on how to install Power Zero's on any bike, calibrate the pedals for accuracy, and perform firmware updates - Simultaneously connect to three Bluetooth devices while broadcasting to an unlimited number of ANT+ devices Power Zero is built on on the dual-sided entry Speedplay Pedal System, which maximizes power transfer by putting your foot closer to the spindle. No more fumbling, fussing or kicking your pedal over; leverage a powerful take off when the light turns green and clip in with ease - Power Zero and the Speedplay Standard Tension Cleat create a secure connection and a streamlined profile. The two form a seamless integration that aids power transfer and increases aerodynamics. The slim profile cleat and rubber texture create enhanced stability when walking in your road shoes off the bike - The cleat can be positioned on the bottom of the shoe and adjusted fore-aft, left-right and rotationally, allowing between 0-15 degrees of float, allowing the heel to pivot around the center of the pedal. This range of motion in the foot, lower leg and knee increases comfort and enhances pedal efficiency - Uncompromised durability and minimal maintenance thanks to their stainless steel construction and triple-sealed bearing system Powered by a rechargeable lithium battery, Power Zero power pedals have a battery life with up to 75 hours, tested and proven to provide accurate power data across changing temperatures that you are sure to encounter while riding - Pair with the rest of the Wahoo Ecosystem compatible devices for the most connected training experience

- Large pedal platform - Lower platform height for pedaling stability - Robust retention claws provide smooth engagement and release - Customize the entry and release tension settings - Strong, durable chrome-moly spindle with 8 mm hex wrench mount - Sealed mechanism - SM-SH51 Cleat included - 1.0 mm cleat spacer included - Binding: Dual sided - Cartridge axle - Cleat retention adjuster - Average weight: 342g - Optional cleat: SM-SH56 - Pedal Type: Off-Road (SPD)

- Wide pedal-to-shoe contact - Lower platform height for pedaling stability - Integrated cage increases stability and control when not clipped in and protects binding mechanism against impacts - Robust retention claws provide smooth engagement and release - Customize the entry and release tension settings - Strong, durable chrome-molly spindle with 8 mm hex wrench mount - Sealed mechanism - 1.0 mm cleat spacer included - Binding Dual sided - SM-SH51 Cleat included - Cleat retention adjuster - Integrated cage - Cartridge axle - Average weight: 438g - Optional cleat: SM-SH56 - Pedal Type: Off-Road (SPD)

- Excellent Pedaling Efficiency - Optimized Balance Of Weight And Rigidity - Injection Molded Carbon Composite Body - Hollow Cleat Bolt - Efficient Power Transfer - High Stability - Extra-Wide Platform - Efficient Power Transfer/Durability - Reduces Flex And Pedal Body Wear - Stainless Steel Body Plate - Excellent Pedaling Efficiency - Smooth Rotation - 2-Ball Bearing, 1-Wide Roller Bushing - Reliable Durability Performance - Stable And Uniform Load Distribution - Wide Bearing Placement - Rider Tune - Customize The Entry And Release Tension Settings - Adjustable Entry And Release Tension Settings - Shimano 3-Year Limited Warranty - Average Weight: 224g - Shimano SPD-SL cleats included - Standard (52mm) - Wide (56mm)

PD-EH500 pedals FEATURE - One side SPD, the other side flat - Light action binding makes frequent stepping-in & out easier - Better grip on flat side for wet condition BENEFIT - Convenient road touring pedal - Optimized for urban riding - Multi-condition - Best match with CT or MT shoes

When it’s time to update the flagship XTR pedals, we look at every detail under a microscope. Off-road racing demands speed, focus, and control. And that’s exactly what the PD-M9120 delivers. Increased drivetrain efficiency, an intuitive and seamless interface, and predictable steering and traction control are the benchmarks of the M9100 series pedals. The M9120 are the weapon of choice for WC racers worldwide. BETTER MUD CLEARANCE - Cylindrical contact area sheds mud even better for consistent stepping-in & out performance and rider confidence. ADDED EFFICIENCY + DURABILITY - Increased axle strength for long service life. M9100 comes in two axle lengths – 52 mm and 55 mm crank to pedal center. LARGER CONTACT AREA - The M9120 platform is designed for maximum shoe-to-pedal contact area without extra weight or rotating mass. Cage protects the binding and makes step in easy. BETTER MUD CLEARANCE - Wider edge-to-edge contact area provides solid shoe-to-pedal interface, transmits power more efficiently for faster and more consistent acceleration, and better bike control.

Stable and Efficient: Wide bearing placement and low platform height promote an even load distribution and increase pedaling stability for maximum power transfer Superb Mud-Shedding: Rounded surface edges and open binding design ensure reliable performance even in the most challenging conditions - Exceptional Durability: Strong chrome-moly spindle and low-maintenance sealed bearings spin smoothly season after season - Dual Axle Options: Available in standard or a 3mm shorter axle to match Q-factor of Shimano SPD-SL road pedals, providing a smooth transition for road riders getting into gravel - Low Weight: At a wispy 315 grams per pair, the XTR PD-M9200 pedals won’t slow you down - Pedal Axle Material: Chromoly Steel - Pedal Body: Aluminum - Size: 9/16"

Shimano's PD-R550 SPD-SL Pedals offer wide, stable platforms for great support and stability when you're out on the road. An extra-wide platform maximizes power transfer. Durable stainless steel tread plates reduce flex and pedal body wear. Wide bearing placement provides uniform load distribution for miles and miles of riding. - 310 grams (pair)

Shimano Ultegra R8000 pedals. - Pro-level performance and lightweight for the enthusiast - The legacy of Shimano design, quality and performance - Carbon-composite body - Extra-wide platform for a more efficient transfer of power - Adjustable entry and release tension settings - 4mm longer axle available - Low stack height - 0.7mm lower than PD-6800 - Model Number: PD-R8000 - Series: Ultegra - Pedal System: SPD-SL - Average Weight: 248 grams

Chester returns to the party with more grip, a second size option and a better ride feel, all with the same tough composite build at a price that any rider can get behind. With fully serviceable internals, eight colors and a Lifetime Warranty inclusive of crashes, you’ll be glad to have Chester along for the ride. Chester pedals provide the feel you want with the grip you need, at an exceptional value. - Chromoly Steel axle - Nylon Composite body - 11 pins per side, including 9 metal and 2 co-molded plastic - 16mm platform height - Available in two size options - Large: 115 x 110mm

The RaceFace Ride pedal features a slim nylon-composite platform, and offers a concave and lightweight design for legitimate performance. - Molded traction pins give you all the grip you need without risk of damaging your shoes or shins - Durable Cro-Mo steel axle features a standard 9/16” pedal thread and serviceable internal parts - 9/16"

Ever heard of the Goldilocks Zone? We're not talking about a family of bears here. The Goldilocks Zone is a precise zone within the universe to sustain life. Well, technically, it's the right range of temperatures for water to remain liquid. Whatever. The new Loam Pedal is that zone. That perfect balance of the best elements to breathe new life into all of your rides. - Forged and CNC'd 6061 Aluminum - Sealed Cartridge and Roller Bearings - 445 Grams Per Pair - 22 Replaceable Pins Per Pedal - Platform Size of 105mm W x 115mm L - Sold In Pairs

Houston, we have... no problems here. The all-new Range Pedal is the perfect blend of comfort, grip, affordability and colorful pops for the best no-compromise flat pedal. - Glass fiber-reinforced nylon composite - 390g per pair - 1 inboard bushing, 1x cartridge bearing, 1x roller bearing - 22 steel pins and nuts per pedal - Platform Size of 108mm W x 115mm L - Sold In Pairs

The OneUp Aluminum Pedals features a huge (115x105mm) super grippy platform with 10 rear-loading hexagonal steel pins per side to keep your feet planted on even the roughest of trails. With a weight of only 365g, the OneUp Aluminum Pedals won't slow you down on the climbs. Designed from stealth rubber down and shaped with a subtle convex profile to provide you with more grip thanks to the pedals sitting in the natural arch of your foot. The ultra-thin design (only 8mm at the leading edge) gives you maximum clearance to reduce pedal strikes and deflect off trail obstacle. Clip Less, Ride More. When it s finally time to service your bearings, the unique cassette tool lock ring system makes re-greasing the bearings exceptionally fast and easy. FEATURES - 10 rear loading custom hexagonal removable pins per side for maximum grip - Ultra thin leading edge chamfered design to deflect off any obstacle - Fully sealed and serviceable design with built in bearing extractor - Wide platform design for increased stability - Contoured shape provides ultimate connected feel SPECS - Weight: 365g - Platform Size: 115x105mm - # of Pins: 10 per side - Axle Material: Chromoly steel - Height: 8.3-12mm - Pin to Axle distance: 112mm - Color: Black, Green, Grey, Blue, Orange, Red, Purple, OilSlick - Body Material: 6061-T6 Aluminum COMPATIBILITY - Currently, due to the deep counterbore of the crank arms, these pedals are not compatible with SRAM Carbon cranks. - These pedals are not compatible with crank boots without modification to the crank boots. We recommend removing crankboots before installation.

Light enough for cross country and durable enough for downhill. OneUp Clip Pedals are an ultra thin, super light pedal with a DH-size platform and a secure feel that you can fine tune. They’re SPD compatible and available in 8 colours. These are your new favourite pedals.

The OneUp Composite Pedals features a huge (115x105mm) super grippy platform with 10 rear-loading steel pins per side to keep your feet planted on even the roughest of trails. With a weight of only 355g, they won't slow you down on the climbs. Designed from stealth rubber down and shaped with a subtle convex profile to provide you with more grip thanks to the pedal sitting in the natural arch of your foot. The thin leading edge chamfered design gives you maximum clearance to reduce pedal strikes and deflect off trail obstacle. FEATURES - 10 rear loading Steel pins / side, with Nyloc nuts - DU plus cartridge bearing axle system - Thin leading edge chamfered design to deflect off obstacles - Wide platform design for increased stability - Contoured shape provides ultimate connected feel SPECS - Weight: 355g - Platform Size: 115x105mm - # of Pins: 10 per side - Axle Material: Black chromoly steel - Height: 18.5mm (13.3 at the leading edge) - Pin to Axle distance: 108mm - Color: Stealth Black, Red, Blue, Orange - Body Material: Nylon Composite

Get ultimate grip and bike control with our innovative Wave profile. "Most flat pedal profiles are either convex or concave. Wave is a patented hybrid convex/concave shape that promotes an aggressive heels-dropped riding position and gives you a more natural pedal stroke when seated. With Wave, your foot is being held by the shape of the pedal - not just the pins. It’s time to ride the Wave.seated. With Wave, your foot is being held by the shape of the pedal - not just the pins."

KEO BLADE CARBON CERAMIC Ti pedals are the flagship model of LOOK's road pedal range. They feature carbon blade technology which bears its name, ceramic bearings and the addition of titanium spindles, creating a pedal of incomparable weight and impressive aerodynamics. These pedals are designed to win. - New leading edge profiling for increased aero dynamics and reduced drag - Improved sealed spindle design to resist water intrusion with dual sealed ceramic bearings and 1 needle bearing - Better retention lever durability compared to previous design - Easier clip-in rotation due to improved weight balance - 3-part high grade stainless steel contact points for higher impact resistance and durability - 64mm wide platform and 700mm² contact surface provides maximum power transfer and distribution of foot pressure - Easy clip in/out with composite blade retention 16 (installed) - Carbon Body, Titanium Spindle - KEO cleats included

KEO BLADE CARBON pedals feature a Chromoly axle and stainless steel bearings for extreme reliability. Beyond its weight, the larger surface contact area-to-weight ratio is the best in class. Light, aerodynamic and powerful, these pedals are ready for the ride. - New leading edge profiling for increased aero dynamics and reduced drag - Improved sealed spindle design to resist water intrusion with dual sealed steel bearings and 1 needle bearing - Better retention lever durability compared to previous design - Easier clip-in rotation due to improved weight balance - 3-part high grade stainless steel contact points for higher impact resistance and durability - 64mm wide platform and 700mm² contact surface provides maximum power transfer and distribution of foot pressure - Easy clip in/out with composite blade retention 8 (installed) - Carbon Body, Chromoly + Spindle - KEO cleats included

Bigger, grippier, lighter and as tough as ever. The Penthouse Flat MK5 pedal is here! After two years of development and testing the MK5 Penthouse Flat is here. Retaining our signature toughness, the MK5 is the lightest and grippiest Burgtec pedal to date. We did this by not only increasing the size of the pedal platform but also how concave it is. Furthermore, we reduced the diameter of the pins and added the most wear-resistant internals on the market. From the outside to the inside, we've sweated the details of the MK5 to bring you the ultimate flat pedal. - Weight: 379g - Platform material: 7075 Alloy - Profile: 15mm - Platform: 100mm x 102mm - Dish: 2mm (concave) - Pin material: Stainless steel - Pin width: 3.5mm - Pin height: 4.5mm - Axle Material: EN24T Steel - Internals: 2 x Igus W300 bushings, single sealed bearing and inboard rubber oil seal

Xpedo's designers went back to the drawing board for the GFX to create a fresh new design to meet the demands of the evolving downhill racing styles. The latitude entry system allows rapid engagement in any condition, positioning the front claw upwards for intuitive, seamless contact with the pedal. The Posi-Fit retention system is fully adjustable for fine-tuning the entry and release. The low-profile 6061 CNC body with adjustable height pins provide traction and support with any style of shoes. Tapered cromoly spindles roll on three precision cartridge bearings for easy maintenance. Wider Q-factor allows ample clearance between shoe and crankarm. - Weight: 468g CrMo - Body: 60661 CNC AL - Spindle: Cromoly - Bearings: 3 Cartridge - Springs: SWP - Pins: 16 adjustable height grub pins per pair - Cleat: XPEDO XPT (6° Float)

Wolf Tooth Ripsaw Aluminum Pedals feature a slim, lightweight design with a slight convex profile. The large, asymmetric machined aluminum platform provides strong foot support for all-mountain riding, while the thin convex profile is just 7mm thick at the leading edge. Inside the pedal are three fully sealed cartridge bearings, a stainless steel axle, a igus bushing, and a custom radial seal to protect internal components against trail debris. Slim Convex Profile Ripsaw pedals are 12.5mm thick in the center and just 7mm thick in the front and rear edges. This profile is supportive and comfortable for all riders, while performing exceptionally well for riders who prefer pedaling with a mid-foot position or for shoes that do not have much structure or support. Extra Grip Each side of the pedal has 12 stainless steel rear-loading 4.5mm pins for loads of traction. An additional six 4.5mm pins ship with the pedal. Shorter 3mm pins are available as replacement parts to customize the convexity of the pedal; by installing shorter pins on the edges, the convex profile is emphasized. Formed with Purpose The slight convex profile of the pedal body is tallest at the pedal spindle. The shape then tapers toward each edge from there. This profile aligns perfectly with the arch of your foot and provides a strong platform for power transfer. Reliable Performance Three low-friction, fully sealed cartridge bearings and one igus bushing with a custom radial seal protect internal components against trail debris for riding in all conditions. Precision Machining Each Ripsaw Aluminum Pedal body begins as a billet of raw aluminum. After 37 minutes in our CNC mills, the result is a beautifully crafted pedal body that is ready for anodizing and assembly. If you’re a nerd for machining, you’ll appreciate the intricate gradients and machine paths.

Waveform Pedals are designed for all-mountain riding, from XC to downhill. Available in two different sizes, proportionally scaled to provide a supportive platform that's shaped to match the footprint of your shoe. They have a slim, dual-concave profile that is 14mm thick at the perimeter and just 12.5mm thick in the center, cradling your foot for optimal pedal feel. Each side of the pedal has 11 stainless steel rear-loading pins for loads of traction. The design also features a large, tapered leading edge to deflect pedal strikes on rough terrain. A custom radial seal protects three fully sealed cartridge bearings for low-friction riding in all conditions. - Proportionally designed platform, shaped to match shoe profile - Slim, concave profile with large tapered leading edge to deflect pedal strikes - 3 low friction, fully sealed cartridge bearings and 1 Igus bushing per pedal - V-ring rotary seal to protect against contamination - 11 stainless steel, rear-loading pins per side (pins 4.5mm tall), includes 6 extra grip pins - Fully serviceable with a set of hex keys, no special tools needed - Large Platform: 112mm x 106mm

Wellgo LU-A52 BMX Platform Pedals provide stability and traction where it's needed. - Removable traction pins - Sealed bearings

Wellgo B-Series BMX/Mountain Platform Pedals. Molded pins

Wellgo B-Series BMX/Mountain Platform Pedals.

Aluminum body with plastic cage overmolded.

Wellgo LU-895 DU Caged Mountain Pedals feature a 1-Piece molded, cage-style body with DU Polymer bearing/bushings. Accepts toe clips/straps

An affordable pedal option for city cruiser bikes. Features a rubberized cage.