Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Seatposts

$633.00
The new Reverb AXS XPLR dropper post delivers more control, confidence, and fun on gravel roads everywhere. Getting the saddle out of the way means more room to move, saving you from awkward maneuvering and sketchy descents. We created an all-new design complete with lightweight air-only internals featuring built-in compliance we call ActiveRide. It's like travel for your saddle. Enabled by SRAM AXS technology, Reverb AXS XPLR is part of the ultimate personalized cockpit. - New 27.2mm Reverb AXS XPLR delivers more control, confidence, and fun for gravel - ActiveRide—Air only internals provide a fully rigid top-out position. With the touch of your AXS controller, you've got built-in compliance to ensure comfort and control over the roughest sections of gravel - Two travel options to choose—50mm or 75mm - Saddle clamp options compatible with 7x10 oval carbon rails. - Seat post length includes 400mm and 350mm (50mm drop only) - AXS Technology allows rider customization via the AXS Mobile App - AXS handlebar controls (drop or flat bar) - Shared battery with all other SRAM AXS enabled components - System is completely waterproof and dustproof to IP69K—take it anywhere - SRAM AXS battery and charger included SPECIFICATIONS: - TRAVEL: 50mm, 75mm - POST DIAMETER: 27.2mm - POST LENGTH: 350mm, 400mm - REMOTE: AXS Controller Sold Separately - SADDLE RAIL COMPATIBILITY: Round/Oval (7x9 & 7x10), Round/Oval (7x9) - WEIGHT (G): 562 - WEIGHT BASED ON: 75mm Travel 400mm Length W/O battery - Battery 25g
$800.00 - $861.00 $800.00 - $861.00 Up to 5% Off
Our intention with Reverb AXS was inventive and pure: No hoses. No routing. No energy wasted. Not a single thing in the way of the experience. We created a reliable wireless-electronic dropper post and controller that actuates with drastically less effort and zero distraction. Expanding what's possible on a bike, Reverb AXS is enabled by SRAM AXS technology, a new level of interaction, personalization, and connectivity across all AXS-enabled components. - Effortless Electronic-Wireless actuation and infinite height adjustment with a single touch. - Clean, simple and fast to install. No hoses to route, no fishing required. - Updated internals for faster return speed in all conditions. - New Vent Valve Technology, a simple and reliable built in service solution without disassembly of the seatpost. - SRAM AXS technology, a new level of interaction, personalization, and connectivity across all AXS-enabled components. - Includes RockShox AXS handlebar controller, rechargeable SRAM battery, and charger.
$229.99
The minimal design of the ShockStop Seatpost blends seamlessly with the aesthetic of modern gravel, road, and e-bikes. Along with the ShockStop Stem, this system works together to reduce fatigue and strain, letting you ride further, faster, and more comfortably. Benefits: - Go further—reducing fatigue from bumps and vibrations - Ride faster—energy that is normally wasted suspending your body is converted into forward motion - Take control—customize your suspension feel to float over obstacles and maintain control Details: - 35mm of active suspension travel - Infinitely adjustable stiffness via pre-load adjustment and swappable springs - Adjusting stiffness / pre-load does not reduce travel - Swappable springs included to accommodate varied rider weight and preference - Optimized linkage geometry provides ultra-responsive suspension feel - Check technical specifications for compatibility What's in the Box: - 1 x ShockStop Seatpost - 2 x springs (1 pre-installed, 1 included in box for increased stiffness) - All required hardware
$149.99
- Highly tested & engineered unidirectional carbon tube offers outstanding fatigue & impact strength for a lightweight XC post - Simple, lightweight 2 bolt design permits the saddle to be installed without disassembling the head - Angled clamp bolts allow easy tool access for hassle free adjustment and tightening - The rubber seatpost grommet fully seals the post to prevent water entering your seat tube - Hunter head is suitable for most rail types 7/8mm alloy rails and 7/9mm carbon - Wide lower cradle gives extra rail support for lightweight saddle rails - Narrow upper cradle increases the amount of forward/back saddle adjustment - Tilt Adjustment 6° up 12° down with Zero offset
$199.00
The Cascade dropper post pays homage to the Cascade mountain range, home to some of the best riding in the PNW. This post is a workhorse: it’s super reliable, loved by our customers, and now features multiple travel options. The Cascade provides dependable up and down service for the miles to come, and maintenance on the Cascade is easy (like all our droppers). Plus, external routing at the mid-cap ensures your cables are kept nice and tidy during up and down actuation. You can find sweet upgrades to the Cascade’s OG dropper design on the posts featuring 150/170mm of travel. These models have larger diameter stanchions, making them stiffer and lighter… which is sweet because who wants a bike part that’s heavy and too compliant? These longer travel models also come with an added DU bushing to combat seat wobble, because let's face it… the only thing that should be wobbly on your bike are your legs after a long ride. Levers: - Choose from our Loam Lever, Puget 1x or 2x drivetrain compatible levers, or Roadie/Drop Bar Lever Kit for road bars - 1x Lever - Designed to be used with bikes using a single front chainring, this is a "shifter style" lever - 2x lever - Designed to play nice with front shifters, this is a "vertical" lever that accommodates for the shifter on the left side of your handlebar Product Specs: - Choose any lever kit - 30.9 & 31.6mm Diameters - Weights: 125mm - 608g, 150mm - 613g, 170mm - 674g - 2-bolt Micro Adjust Head - Fixed External Routing at the Mid Cap for clean cable routing - 3-year warranty!
$199.00 - $209.00
We made this post to honor your most adventurous days on the trail. From the quadzilla climbs to the serpentine descents, the Loam Dropper capitalizes on PNW's best-in-class reliability in our shortest, lightest, and most customizable package yet. The new Loam also features swappable silicone bands that hug the midcap, giving you the opportunity to match your bike (or mood). UPGRADED TRAVEL PLANS By shortening the overall post and adding 25mm of Tool-Less Travel Adjust we’ve guaranteed you more drop across a wider variety of frame designs, sizes, and body types. This means more distraction-free descents with less awkward high fives from your saddle when the trail gets rowdy. UNDER PRESSURE Slow and controlled or swift and poppy? Dial-in your dropper’s return rate with personalized pressure, courtesy of the Loam Post’s adjustable air cartridge. MAKE IT YOURS The Loam Post features a machined channel on the mid-cap that's home to a swappable silicone band. Each post comes with our standard Blackout Black band but we offer our full range of colors to match your bike, PNW cockpit or personal chakra aura.
$199.50 - $267.50
The OneUp Dropper post is available in 120mm, 150mm, 180mm and 210mm lengths and all can be shimmed down in travel by 10 or 20mm. We've been obsessed with shaving every last millimeter from the latest OneUp post to give you the the shortest stack height and shortest total length of any dropper post. No other post can get your saddle lower. Starting from $199 USD with free shipping worldwide, cable actuated with reliable sealed cartridge internals for easy home servicing and includes travel adjust shims allow you to custom tune your post to dial in your perfect length. The dropper market is dominated by expensive big brand posts and generic catalog shopped posts with different logos. We want to offer something better, a post with class leading specs, innovative useful features AND real value. Want more from your dropper? Get OneUp. FEATURES - Travel adjust shims allow you to custom tune your post to dial in your perfect length. - Cable actuated for easy installation and a simple no bleed remote - Ergonomic remote paddle position - Reliable sealed cartridge internals - User replaceable cartridge only $60 USD - Easy to service at home - 2 year warranty UPDATES - Shortest total length of any dropper - Shortest stack height of any dropper - New upper DU Bushing in the upper collar - Increased bushing overlap and durability - 100-210mm post lengths in 10mm increments. - 20g lighter SPECS - Drop 120mm, 150mm, 180mm, 210mm adjustable*. - Diameter 30.9, 31.6, 34.9 - Routing Internal only Remote Compatibility: - SRAM Matchmaker X - SRAM MMX clamps - Shimano I-spec-EV - 12 speed XTR M9100, XT M8100 and SLX M7100 - Shimano I-spec II - 11 speed XTR M9000, XT M8000, SLX M8000 only - 22.2mm Bar Clamp - All other groups 10 speed SHIMANO - Cable clamping remote only (post requires cable stop to be assembled at base of post) - Travel Reducing Shim Reduces travel by up to 20mm. Weight Post Only - (30.9) 120mm 435g / 150mm 480g / 180mm 525g / 210mm 570g - (31.6) 120mm 450g / 150mm 500g / 180mm 545g / 210mm 590g - (34.9) 120mm 545g / 150mm 605g / 180mm 660g / 210mm 710g Remote Only - Remote with 22.2mm Bar Clamp - 46g - Remote with SRAM Matchmaker X / I-spec-EV - 43g - Remote with Shimano I-spec-EV - 43g - Remote with Shimano I-spec II - 41g - Housing and Cable (1300mm installed length) - 50g
$349.00 - $359.00
The proven Transfer seatpost gets lighter and tighter. Completely redesigned from the ground up, with improved serviceability, decreased weight, reduced length, and decreased insertion depth. "Factory" says it all. The best-of-the-best technology we have to offer is available in our Factory Series models with our buttery smooth, ultra-durable Genuine Kashima Coat. These products are World Cup proven. The Transfer continues the excellent reputation of smooth function and great reliability with an infinitely adjustable height design, and internal or external cable routing options. Low lever force and great modulation make it easy to regulate return speed and small height adjustments. The Factory Series Transfer features Genuine Kashima Coating for maximum performance. - Cable actuated with tool-free quick disconnect for easier installation and removal - Low lever force provides consistent actuation pressure even with saddle weighted or unweighted - Easy to modulate return speed with lever - Factory Series models feature Genuine Kashima Coat - Remote lever sold separately
$299.00
The proven Transfer seatpost gets lighter and tighter. Completely redesigned from the ground up, with improved serviceability, decreased weight, reduced length, and decreased insertion depth. Performance Elite Transfer Posts retain the same internals, diameter options, drop options, shortened stack heights, new patent-pending head design and proven internals as the Factory Series but have a black anodized upper. - Cable actuated with tool-free quick disconnect for easier installation and removal - Low lever force provides consistent actuation pressure even with saddle weighted or unweighted - Easy to modulate return speed with lever - Remote lever sold separately - 0mm offset
$350.00 - $410.00
3 years of REVIVE out in the market resulted in another benchmark product for BikeYoke: REVIVE 2.0. The new extralong 213mm REVIVE required a lot of re-thinking and re-engineering the whole chassis structure and since we think they deserve it, the shorter REVIVES will also get all the nice updates, and benefit from what was originally implemented only for the longest sibling of the REVIVE family. Noteworthy updates of the REVIVE 2.0 include: - One piece 3D-forged upper tube unit for improved stiffness and strength - Fully hard-anodized pin seats in the upper tube for improved corrosion-resistance - CNC-finished actuation lever for even smoother engagement - New upper saddle clamp and saddle bolts with integrated conical washers for even simpler saddle installation Wanna know more about the REVIVE? What if there was a dropper post, that actually solves and not just improves reliability issues, saves cost and time on the long run, and does not let you worry about too much time spent at service-centers? Or how about “bleeding” your seat post within a few seconds, while it is still installed in your bike? BikeYoke presents the REVIVE dropper post, featuring one of the most brilliant design features in dropper post design in many years. More than 10 years of experience in drop-post design went into the “REVIVE” and the development has finally paid off. Of, course, just as many other companies, BikeYoke would say, that REVIVE is reliable and strong and smooth. And yes, REVIVE is all of that, but not because we tried to improve current designs, but because we were thinking outside of the box and created a new concept, that is completely different from everything before. To understand the benefits over other posts you have to know about the problems of many current designs first. Many of the popular current seatpost designs are based on a hydraulic lockout-system that relies on a perfectly sealing IFP (Internal Floating Piston), separating oil from air to prevent the seatpost from getting sagging or bouncing. There are a lot of difficulties to overcome when using an IFP because an IFP has to maintain 100% sealing function. If air could go to the oil side, your post will start becoming springy. This happens to a lot of posts in the market already and is the main issue why posts need to be serviced. That´s why BikeYoke´s “REVIVE” features a NON-IFP design, because we think it is too difficult - if not impossible - to make a really reliable design using an IFP. REVIVE only requires 2 dynamic seals in the hydraulic circuit: The shaft sealing and the main piston sealing for the lockout mechanism. The highly critical IFP has been removed, and with it the need of perfect concentricity and finish of the sealing surfaces of the tubes. The lack of an IFP also results in the smoothest action you can think of. The most important and ground-breaking feature of Revive is its “REVIVE-VALVE”. Even REVIVE can get air somewhere where it does not belong. This can happen for example when you actuate your seatpost while its upside down. And here is where the patented RESET VALVE comes into play: - Insert a 4mm Hex Key into the REVIVE hex port, turn it and push down the post by hand. - This will reset your hydraulic circuit on the fly - whenever. wherever. This is done just within a few seconds and only by the turn of a 4mm Allen key or the integreated mini reset lever, that comes with the post - of course without even having to remove your drop post from your bike. So, now one might already understand that: - No external air will want go inside the post´s hydraulic circuit, since it is charged with higher pressure, than its surroundings. - No oil will go out (or at least very very little oil over the curse of a long time), because of very stable sealing - external sealing has never been a real problem of current post design - The hydraulic system can be reset to “new” via the unique “REVIVE-valving” - This means the hydraulic circuit is a very stable closed system and basically maintenance free. Still there are parts that will need to be serviced sooner or later and when designing REVIVE it was put a lot of attention to maximum user-friendly serviceability: - Bushings and keyway pins will wear over time. Usually, the pins wear first and you would want to replace them to reset your rotational play. - Exchanging the pins and the lower bushing is simple and does not require any opening of the hydraulic system and can be done within less than 5 minutes. 1 set REVIVE dropper post includes: - 1x REVIVE Seatpost - 1x cable housing 1500mm - 1x inner wire 1700mm - 2x housing endcap - 1x barrel cable clamp - 1x air valve adapter - 1x Quick-Reset-Lever - 1x remote (optional) - 1x BikeYoke I-spec adapter or Splits Clamp (optional) - 1 set titanium saddle bolts and nuts (optional)
$350.00 - $410.00
Our award-winning REVIVE is also available as an oversized version for 34.9mm seattubes. Not only the lower tube diameter increased to 34.9, but also the stanchion tube grew form 25mm to 28mm. Finally there is a dropper that gives a stunning look in beefy seattubes while gaining strenght and stiffness at the same time. This is unrivaled by the competition. Optimized wall thickness and materials keep the weight extremely low and so our REVIVE MAX weighs in lower than some "regular" sized posts of the competition. Let´s see, what´s special about our REVIVE posts: What if there was a dropper post, that actually solves and not just improves reliability issues, saves cost and time on the long run, and does not let you worry about too much time spent at service-centers? Or how about “bleeding” your seat post within a few seconds, while it is still installed in your bike? BikeYoke presents the REVIVE dropper post, featuring one of the most brilliant design features in dropper post design in many years. More than 10 years of experience in drop-post design went into the “REVIVE” and the development has finally paid off. Of, course, just as many other companies, BikeYoke would say, that REVIVE is reliable and strong and smooth, … And yes, REVIVE is all of that, but not because we tried to improve current designs, but because we were thinking outside of the box and created a new concept, that is completely different from everything before. To understand the benefits over other posts you have to know about the problems of many current designs first: Many of the popular current seatpost designs are based on a hydraulic lockout-system that relies on a perfectly sealing IFP (Internal Floating Piston), separating oil from air to prevent the seatpost from getting sagging or bouncing. There are a lot of difficulties to overcome when using an IFP because an IFP has to maintain 100% sealing function. If air could go to the oil side, your post will start becoming springy. This happens to a lot of posts in the market already and is the main issue why posts need to be serviced. That´s why BikeYoke´s “REVIVE” features a NON-IFP design, because we think it is too difficult - if not impossible - to make a really reliable design using an IFP. REVIVE only requires 2 dynamic seals in the hydraulic circuit: The shaft sealing and the main piston sealing for the lockout mechanism. The highly critical IFP has been removed, and with it the need of perfect concentricity and finish of the sealing surfaces of the tubes. The lack of an IFP also results in the smoothest action you can think of. The most important and ground-breaking feature of Revive is its “REVIVE-VALVE”. Even REVIVE can get air somewhere where it does not belong. This can happen for example when you actuate your seatpost while its upside down. And here is where the patented RESET VALVE comes into play: - Insert a 4mm Hex Key into the REVIVE hex port, turn it and push down the post by hand. - This will reset your hydraulic circuit on the fly - whenever. wherever. This is done just within a few seconds and only by the turn of a 4mm Allen key or the integreated mini reset lever, that comes with the post - of course without even having to remove your drop post from your bike. So, now one might already understand that: - No external air will want go inside the post´s hydraulic circuit, since it is charged with higher pressure, than its surroundings. - No oil will go out (or at least very very little oil over the curse of a long time), because of very stable sealing - external sealing has never been a real problem of current post design - The hydraulic system can be reset to “new” via the unique “REVIVE-valving” - This means the hydraulic circuit is a very stable closed system and basically maintenance free. Still there are parts that will need to be serviced sooner or later and when designing REVIVE it was put a lot of attention to maximum user-friendly serviceability: - Bushings and keyway pins will wear over time. Usually, the pins wear first and you would want to replace them to reset your rotational play. - Exchanging the pins and the lower bushing is simple and does not require any opening of the hydraulic system and can be done within less than 5 minutes. 1 set REVIVE dropper post includes: - 1x REVIVE Seatpost - 1x cable housing 1500mm - 1x inner wire 1700mm - 2x housing endcap - 1x barrel cable clamp - 1x air valve adapter - 1x Quick-Reset-Lever - 1x remote (optional) - 1x BikeYoke I-spec adapter or Splits Clamp (optional) - 1 set titanium saddle bolts and nuts (optional)
$285.00
- Designed using SRAM Exogram technology - Available the Zipp SL Speed DI2 Internal Battery Mount to hold a Shimano DI2 seatpost battery within the SL Speed seatpost. (Sold separately) - Matte Black finish
$285.00
- Designed using SRAM Exogram technology - Available the Zipp SL Speed DI2 Internal Battery Mount to hold a Shimano DI2 seatpost battery within the SL Speed seatpost. (Sold separately) - Matte Black finish - Seat Post Diameter: 31.6mm - Seat Post Length: 400mm
$172.00
The carbon Service Course SL seatpost is specifically tuned to be more shock absorbing than the "comfort" seatposts on the market, while still passing our strict internal MTB strength test. Flex engineered into the lightweight carbon tube keeps the rider comfortable over any terrain. Better fit means better performance, and if your saddle is out of position, you'll waste energy with every pedal stroke. The secure, two-bolt clamp makes for easy micro-adjustments of saddle position, and the head has been redesigned for maximum bolt-head accessibility. The Service Course SL seatpost makes it possible for nearly any rider to achieve the perfect fit, and the clamp works with all saddle rail types. - Distinctive Zipp cosmetics - Unidirectional Carbon fiber tuned for ride comfort - Lightweight clamping system - Lifetime warranty
$60.00
On today's road bikes, silver stands out amid the sea of stealthy black color schemes. This time-honored seatpost color is available on the Zipp Service Course Seatpost. Since the introduction of our line of Service Course and Service Course SL components, we've had amazing success with our pro-level athletes in all disciplines. While the successes have reinforced our design decisions, we have also drawn from their feedback. We not only learned how and why athletes make their equipment choices, but how our manufacturing methods and materials affect product performance. With new knowledge as well as new engineering, we are proud to offer redesigned Service Course seatposts. - Material: 6061 aluminum - 2-bolt adjustability - Minimum insertion length: 90mm
$199.99
The X-Fusion Manic post uses internal cable routing and was designed around a low-profile seat cradle and seal collar to fit a broad range of frames. The mechanism is air-sprung and hydraulically locked. The remote can be run on the left or right, above or below the handlebar, but is optimized as a left shifter replacement for 1x drivetrains. - Cable activated, hydraulic action, infinitely adjustable travel - Double key-way design prevents lateral twisting - Double bolt clamp with a wide range of seat angle adjustment. Fits both standard and 7 x 9 mm Carbon Rails - Sealed cartridge internals for quick replacement - Low profile head-seal and saddle clamp increase useable travel
$199.00
The X-Fusion Manic post uses internal cable routing and was designed around a low-profile seat cradle and seal collar to fit a broad range of frames. The mechanism is air-sprung and hydraulically locked. The remote can be run on the left or right, above or below the handlebar, but is optimized as a left shifter replacement for 1x drivetrains. - Cable activated, hydraulic action, infinitely adjustable travel - Double key-way design prevents lateral twisting - Double bolt clamp with a wide range of seat angle adjustment. Fits both standard and 7 x 9 mm Carbon Rails - Sealed cartridge internals for quick replacement - Low profile head-seal and saddle clamp increase useable travel
$349.95 - $379.95
The Wolf Tooth Resolve Dropper Post is the first dropper post to use a self-bleeding cartridge. It has the shortest stack height of any dropper post on the market, has a short insertion depth, is one of the lightest dropper posts, and is completely serviceable at home. - Self-Bleeding Resolve Cartridge: At the heart of Resolve Dropper Post is a self-bleeding cartridge that removes air from the fluid chamber with every actuation. All dropper posts can get air in the chamber, which leads to sag and squish. Resolve Dropper Post is the only dropper post that purges air from the chamber, which means you'll never need to buy a new cartridge as you do with all other dropper posts. - Shortest Stack Height: The shortest stack height of any dropper post means that Resolve can get your saddle lower than any other dropper post. The lower your saddle, the more room you have to maneuver your bike on drops and techy descents. - Weight and weight per travel is equal to the best: Resolve Dropper Post is one of the most lightweight dropper posts on the market when it comes to grams per millimeter of travel. It's as much as 26% lighter than other dropper posts of the same travel size. - Short Insertion Length: When a dropper post has a short insertion length, longer travel options are unlocked for more bikes. A short insertion length is vital for smaller bikes, frames with curved seat tubes, and frames with seat tubes that have bottle bosses. - Travel Reduction with Spacers: The travel length of your Resolve dropper post can be customized in order to suit your bike and saddle height. Spacer kits are sold separately or those who would like to have the adjustment made later by their local shop mechanic. If you are comfortable with working on suspension components, you may be able to complete the installation yourself.
$70.00
The Whisky No.7 Seatposts are made from the highest quality materials to be durable, lightweight, and comfortable. Whether you’re remounting during the cross race, or abusing them on the trail, you can trust Whisky’s seatposts. Available in different diameters and offsets. - Convenient finger adjustment of saddle angle - Unidirectional carbon shaft, forged aluminum head - No rider weight limit - 5 year Whisky warranty - ASTM Condition 3 - For rough off-road riding and jumps less than 24"
$105.00
Seatposts can be an overlooked part of the bike, but at Whisky Parts Co., everything gets the same attention to detail so your ride never suffers. Their seatposts are made from the highest quality carbon, ensuring they are durable, lightweight, and comfortable. Whether you’re remounting during a cross race or abusing them on the trail, you'll be glad you have the No.7. - Carbon shaft absorbs trail chatter - UD carbon shaft, forged aluminum head
$44.99 - $58.99
WeThePeople's Socket Pivotal seat post is made from 6061 aluminum for a perfect blend of strength and weight savings. It works with all Pivotal seats and comes in the perfect color and size to match your bike. Plus, there's a 17mm socket head built into the bottom of the post for park-side adjustments to your wheels.
$55.00
The Velo Orange Grand Cru seatpost is made from one piece of aluminum, internally ovalized to trim weight. The Grand Cru seatpost’s head is integral with the post – not pressed on – for great strength and weight savings. 0mm Setback: Zero-setback/offset posts are commonly used on mountain bikes and by some bikepackers. The Grand Cru zero setback post uses a one-bolt, ergonomic side-adjustment mechanism for both saddle rail clamping and fore-aft adjustment. 30.2mm Setback: For riders who prefer the comfort of leather saddles but have found proper saddle placement difficult due the short rails on leather saddles Velo Orange offers the Grand Cru Long Setback with an ample 30.2mm of setback. This model uses a two-bolt design.
$64.00
TruVativ's Stylo T30 Seatpost is constructed with a 1-piece 3D-forged 7050 aluminum tube to be light and strong. The sturdy dual-bolt head provides loads of adjustability so you can fine tune your saddle position.
$479.95
Thomson Covert Elite Dropper Seatpost-31.6 150mm Black Internal. We've set the bar with the Thomson covert black dropper post. It's designed around internal routing for clean installation and an updated shift style remote lever for effortless operation. The Thomson Covert Dropper includes a new shifter oriented remote lever for easy operation. The cartridge-based system is designed to have the longest service life in the industry. If repair is needed, it's fast, affordable, and simple. Every part that makes up the Covert dropper is carefully chosen, and of the highest grade quality available. - Custom made Norglide bearing bushings and Trelleborg O-Rings and seals - Thomson saddle clamps and fasteners - Motul Oil for durability and precision quality. - The return speed is damped in the last 15mm of upward travel to be gentle on your seating area. - 60mm (Ø27.2 only), 100mm, 125mm, 150mm of infinite travel. - Passes ISO 4210 fatigue and strength tests for seat posts.
$38.99
Sunday Bikes pivotal seatpost.
$16.99
Stolen Thermalite Pivotal Seatpost. Thermalite is proprietary material made with Nylon 66 base w/ 50% longer glass fiber infusion. Thermalite posts are 30% lighter than the current Alloy posts on the market. - Dupont Nylon 66 with 50% longer glass fiber infusion - 1/3 lighter than any alloy post on the market - Compatible with all Pivotal seats - Weight: 2.8oz.
$29.99
The Tuner pivotal post features a 220mm length with grooves evenly spaced every 15mm for cut lines or seat height indication. - 6061 alloy forged post - Weight: 4.6oz - Clamp Style: Pivotal
$190.00
Finding your rhythm can make or break your race. Our Control SL seat post puts you in an ideal position for high-output efforts and is easily adjusted thanks to the 2-bolt system letting you easily make micro-alignments for that dialed attack position—all while remaining feather light at 180g for XC riding and racing. Its 30.9mm post diameter and 415mm length make the Control SL seat post a perfect match for the modern XC bike. Once your riding position is set, you’re focus is dialed on ride fast and efficiently —not your seat post. - Material: High-modulus carbon fiber - Length: 415mm - Offset: 0mm - Post Diameter: 30.9mm - Seat Clamp: 2-bolt Micro Adjust with 46mm saddle rail cradle, Compatible with carbon and alloy saddle rails - Bolts: Titanium - Weight: 180g - System Weight Limit: 275lbs / 125kg
$225.00
This is the first seatpost that’s compliant AND aerodynamic—a total win, win. We initially developed the Pavé seatpost for the all-new Roubaix, and it’ll make a fantastic addition to your Tarmac SL6. Of course, it’s also designed to make fine-tuning your saddle position a breeze with a single-bolt adjustable head and two setback options. - FACT carbon construction paired with a D-shaped seatpost that's compatible with the 2020 Roubaix and Taramc SL6. - Engineered to have the saddle move in a perfect arc, aka a back & downward motion. - Setback: 20mm/0mm - Cylindrical aluminum head assembly adjusts fore/aft and tilt with a single bolt. - Length: 380mm/450mm - Approximate Weight: 209g
$250.00
This replacement seatpost for the Tarmac SL7 ensures the perfect fit with two different setback options: 0mm and 20mm. - FACT carbon construction and aerodynamic profile compatible with the 2021 Tarmac SL7. - Setback: 0/20mm. - Sleek Di2 integration hides the Di2 junction box inside. - Cylindrical aluminum head assembly adjusts fore-aft and tilt with an easy-access single bolt.
Page 1 of 4 Next page